Request Quotation/Tender or Information Below

Featured companies for Air Cooled Chillers

This page is associated with requesting prices, inviting tenders or requesting pre-tender information on the following;

Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator

Daikin air cooled chillers have a standard inverter fan and semi hermetic single screw compressor developed by Daikin for higher efficiency ventilation. All components are optimised for use with R-407C refrigerant allowing standard operation ranges of down to -15°C ambient. The air cooled chiller cools water temperature down to -10°C and has a 30% heat recovery at 60°C and 85% heat recovery at 45°C hot water temperature. Daikin's air cooled chiller also features multiple steps, doubled refrigeration circuits from 160 HP onwards, and victaulic joints and filter as standard.

Carrier, Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator Carrier have developed the Aquaforce 30XA water-cooled chiller for long-term optimal performance for both industrial and commercial air conditioning applications. Offering an unrivalled energy efficiency, with lower operational noise levels the Aquaforce, water-cooled chiller has an average EER of 3.15, achieving the highest in energy efficient ratings. Carrier have developed their water cooled chiller with an innovative aluminium micro channel heat exchanger capable of offering exceptionally efficiency, with capabilities from 270 to 1700 kW.

The Rhoss range of air cooled chillers, available exclusively through Coolmation, offer high energy performance operation, Eurovent validated, while meeting specific requirements. Rhoss air cooled chillers are available in capacities up to 2100kW with scroll, screw and the oil free Turbocor centrifugal compressors, and with R410A and R134A refrigerants. Many are available with integral circulating pumps and pressurisation sets. Energy efficiency is enhanced by Rhoss’s unique Adaptive Function Plus control technology and the majority of the Rhoss air cooled chiller range are listed on the Carbon Trust Energy Technology List.

Hitachi, Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator Hitachi have developed the Samurai cooling only air cooled chiller, which is compact and highly efficient, low noise, with a low vibration design suited for most air cooling applications. Hitachi has also developed an extremely accurate set point control system, with a modulating capacity control 25 - 100%. The Samurai air cooled chiller operates using a Hitachi screw compressor, generating a highly efficient workload whilst minimising energy waste. Other cost effective systems include R407c refrigerant, plate heat exchanger and economising circuit. As well as a multipoint fault and alarm system, which is integrated into the 4, 7 segment LCD displays.

2Cool, Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator 2 Cool Limited have developed the B2CWC, air cooled chiller designed for domestic and commercial applications, and features an integrated hydraulic kit to allow easy installation. The air cooled chiller unit has a hermetic SCROLL compressor with thermal protection, and is housed within the sound attenuated enclosure. Operations are monitored by an electronic microprocessor, providing regulated water temperature and monitoring operation parameters. Other air cooled chiller products include the F2CS-L, which has a modular design, offering reliable, high performance operations. The F2CS-S air cooled chiller utilises a high-quality screw type compressor with high heating and cooling capacity, suitable for -5°C to 50°C ambient temperatures.

Flakt Woods, Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator Fläkt Woods develop and supply Chiller units designed for high-efficiency, operating with a reduced annual energy consumption for industrial and commercial applications. Fläkt Woods' airport chillers have an operational capacity of up to 1800 kW, providing low energy consumption, low sound and vibration levels. Other features include highly efficient scroll or screw compressors which can generate savings of up to 25%, during part load operation times. Optional features include heat pump and electronic control systems.

Dunham Bush have developed a full range of packaged air cooled chillers, operating with scroll and screw compressor technology and the option of direct expansion or flooded evaporator designs, ensuring high efficiency, low noise and compact dimensions. Dunham Bush have developed an air cooled chiller that operates at an exceptionally high efficiency with full and part load efficiencies confirmed by ARI testing.

Airedale’s range of air cooled, water cooled, and remote condenser chillers provides customers with a huge choice of cooling capacities from 20kW to 1MW to meet the needs of any environment no matter how small or large. The TurboChill air-cooled, high capacity chiller is designed from the ground up with revolutionary centrifugal Turbocor compressors integrated with cutting-edge components. Brilliantly engineered, using Airedale’s vast expertise in cooling technology, the TurboChill minimises environmental impact by lifting efficiency to new heights and pushing back sound levels. The intelligent, self-optimising compressors present near silent, oil-free operation and allow ultra efficient variable speed control.

Space Air, Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator Space Air - Daikin is one of the largest manufacturers of air conditioning and heat pump equipment in the world, with a range of over 600 energy efficient models, designed to satisfy almost any type of application. Daikin is the only manufacturer in the world that produces both air conditioning/heat pump equipment and refrigerants, which places them uniquely at the forefront of new developments in technology. This advantage has enabled Daikin to lead the field in designing equipment fully optimised for the newer refrigerants such as R407C, R134a and R410A. Daikin products; splits, multi-splits, VRV III, VRV III-S, VRV WII, packaged units, applied systems - chillers, chilled water fan coil units all carry the standard warranty of parts and labour for a period of 3 years.

Whatever you know it as - Close Control, Precision Air Conditioning or just plain Sensible Cooling, Uniflair Limited is, Cost-conscious, Environmentally responsible, Effective and efficient, Dependable, Stylish and SMART AT HEART. For a precisely controlled environment, with minimum energy use and maximum reliability, Uniflair offers you "IT" cooling systems with intelligence. Uniflair also manufacture a wide range of other high quality products including:- Air cooled chillers (to 790kW), Centrifugal fan chillers, Water cooled chillers, telecom cooling units, Fan coil units. ARA, CRA Series: 4kW - 660kW As with all Uniflair products, Precision Control is at the heart of ARA/CRA Chiller design. All units control the chilled water temperature to exacting standards even in low load conditions. Depending on size, either Scroll or Screw Compressor technology provides low noise, low vibration cooling, Easy to install, service and maintain most chillers can be fitted with pumps, expansion vessels, pumps and buffer tanks to reduce on-site costs and avoid all problems associated with multi-sourcing ancillary items.

Eurogem provides air conditioning solutions for a variety of end users for domestic and commercial premises. They offer a full air conditioning package from single split units; multi split units and portable units to provide a temperature-controlled and comfortable environment for offices, retail premises, surgeries, restaurants, homes, conservatories and gyms. Eurogem supply wall mounted, standing cassette or ceiling range of units for all the major manufactures. Eurogem adheres to high standards of installation, site tidiness and after sales support, their top quality workmanship together with fully qualified service engineers will minimise disruption and will work at times convenient to their client. They can tailor your needs and requirements after undertaking an initial site survey and as a brand independent supplier our advice is completely committed to customer satisfaction.

ICS Industrial Cooling Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator ICS Industrial Cooling is a nationwide supplier of industrial cooling units. As one of Europe’s leading specialists in cooling equipment and services ICS has the expertise and experience you can trust. The company provides a range of standard products and turnkey installations across a diverse group of industry sectors. These include plastics processing, metal finishing, food and beverage, chemical, medical, engineering, automotive and aerospace to name but a few. An extensive range of chillers are available to you incorporating the latest energy efficient technology, such as Turbocor Centrifugal compressors, ozone-benign refrigerants and free cooling capabilities.Unsure of what you need and how it would apply to your application? No problem. ICS have local engineers nationwide who are experienced at engineering a solution and providing a first-class assessment to assist with your decision-making.

Arundel Jones Associates LLP Registered in England and Wales No. OC330189
Hill Farm, Linton Hill, Maidstone, Kent ME 17 4AL
Tel : 01622 745333 email

Tender Category : Air Cooled Chillers, Air Cooled Packaged Chillers, Screw Compressors, Single Flooded Evaporator

Request Quotation/Tender or Information Below

Featured companies for Air Cooled Chillers

SEND YOUR TENDER OR REQUEST PRE TENDER INFORMATION