Request Quotation/Tender or Information Below

Featured companies for Dry Coolers

This page is associated with requesting prices, inviting tenders or requesting pre-tender information on the following;

Dry Coolers, Adiabatic Dry Coolers, Air Blast dry coolers.

Airedale designs and manufactures an extensive range of air conditioning products for an international market and is part of the Modine group of companies. Founded in 1974, Airedale has grown to become a prominent leader in the research, design and manufacture of an impressive range of energy efficient, intelligent cooling solutions. Airedale boasts a 25,000m² manufacturing facility and £2.5 million test centre in Leeds, UK, which is widely regarded as a centre of excellence for air conditioning. Recent research and innovative development has focused specifically on carbon reduction and increased energy efficiency technologies to ensure that whole life costs and the environmental effects of all Airedale products are reduced substantially.

Van Spall Associates, Dry Coolers, Adiabatic Dry Coolers, Air Blast dry coolers Since van Spall Associates first introduced Adiabatic Dry Coolers to the market, some twenty years ago, virtually every Dry Cooler manufacturer now offers an Adiabatic package. It is prudent to be aware that after due consultation with the Health & Safety Executive, several Local Authorities including Westminster Council and the Corporation of London, van Spall Associates have incorporated a number of features to ensure compliance with Health & Safety requirements. These features are:- The spray water is introduced into the incoming air stream and is not directed over the coil, All spray water is passed through an ultra-violet disinfection system, On cessation of the spraying cycle, all water in the spray pipework system is automatically drained, Should the ultra-violet lamp fail, the spray system is automatically shut down until the ultra-violet lamp is replaced. Once replaced, the spray system will recommence, if required. There is no water held in retention or carried through to the air discharge. van Spall Associates Ltd offer a complete range of air blast dry coolers for sealed water cooling systems and a 'one stop shop' solution for all your cooling needs. Sealed systems provide contaminant free cooling for air-conditioning, power generation, compressor and process cooling applications. van Spall standard cooler configurations include: Flat bed horizontal ABC 44 sizes, Flat bed vertical ABC 44 sizes, 'V' block SVD 20 sizes & 'V' block DVVD 28 sizes. Centrifugal fan models CABC for ultra-quiet and indoor-ducted applications are also available. Custom 'specials' can be designed and manufactured as part of our 'one stop shop' cooling solutions service. van Spall air blast dry coolers feature the following benefits: Contaminant free cooling circuit, No water treatment required, Low noise levels, Low operating costs, No discharge 'pluming', No chlorination required & Minimal maintenance.

Guntner Dry Coolers - As with the condensers, our dry air coolers are finned heat exchangers. Used to reject heat from air conditioning plant chillers, water cooled variable refrigerant flow units, Versatemp air conditioning equipment and a variety of other applications, they cool the water/glycol mix in a closed circuit by passing ambient air over the finned surfaces. Dry Air Coolers are mainly used in lieu of wet systems i.e. as a replacement to cooling towers. Dry Air Coolers come in various shapes and sizes ranging from the small 1m length coolers to a truck size 13m. They are preferred by most consultants and end users due to their low profile, low noise and ease of installation. In addition they have no legionnaires risk as they are dry systems. All dry air coolers are suitable for outdoor applications, however, special centrifugal dry air coolers are designed for use indoors and in plant rooms. Our Dry Cooler range includes the following: Flatbed Dry Cooler, V Coil Dry cooler & centrifugal fan Dry cooler for indoor applications. Adiabatic Dry Coolers - Guntner offer a standard factory fitted adiabatic option which comprises a series of specialized water nozzles fitted below each fan. The nozzles are designed to pulverize the water and provide a very fine mist of atomised water droplets which are readily absorbed by the high temperature ambient air approaching the coil. The effect of introducing saturated air onto the coil lowers the theoretical dry bulb temperature and increases the total heat rejection from the dry cooler at high ambient conditions. The use of Adiabatic Dry Coolers is particularly beneficial where space is limited, or where the condenser water temperatures are low. Free cooling may also be enhanced with the adiabatic option. The spray is designed for use during the limited number of days in the UK when the ambient temperatures are high, and is generally enabled by an ambient thermostat and return water temperature thermostat. The spray requires mains water at approximately 2 - 3 bar pressure and considerate of the water consumption, units are not designed for all year round use.

SEND YOUR TENDER OR REQUEST PRE TENDER INFORMATION

Your Name
*

Organisation

Phone
*

E-mail
*

Select which companies you wish to invite to tender or require pre-tender information from:

Airedale
Van Spall Associates
Guntner

Attach tender information (optional)

Your requirements or instructions * required

Please select project type

Please enter numbers shown

Arundel Jones Associates LLP Registered in England and Wales No. OC330189
Hill Farm, Linton Hill, Maidstone, Kent ME 17 4AL
Tel : 01622 745333 email

2008 copyright all rights reserved

Tender Category: Dry Coolers, Adiabatic Dry Coolers, Air Blast dry coolers.