Featured companies for Fan Powered VAV
This page is associated with requesting prices, inviting tenders or requesting pre-tender information on the following;
Fan Powered VAV, VAV Terminal Units, VAV Terminals
Advance
Air FAN-POWERED VAV - Introducing Advanced Air's range of fan
powered variable air volume terminal units - incorporating so many
advanced features, we are raising standards to a new height! These
units are the first to apply advanced fan motor control technology
to ECM brushless dc motors. The result is lower energy consumption
and simpler commissioning. FEATURES AND BENEFITS
Less than half the energy consumption compared with a standard
induction terminal unit including: Airflow rate can be factory
pre-set, remaining constant regardless of system pressure changes
(No need for on-site balancing!), Airflow rate can be set manually
or remotely on site, Extremely long motor life-time - up to 90,000
hours expected. Acoustic foam insulation removes the risk of fibre
migration & Access from all four sides. SINGLE DUCT VAV TERMINAL
UNITS - Accurate flow signal with pressure independent controls from
"Diamond Flow " dynamic pressure sensor. 90 degree damper is quiet,
with near linear performance. Effective acoustic/thermal performance
and no surface erosion using lightweight foam insulation. Rigid, low
leakage casing manufactured from 1.2 mm galvanized mild steel.
Universal flange discharge connection for easy installation of
accessories.
--
Flakt
Woods Fan Powered VAV / Air Volume Control. Flow variators are
products for the control and adaptation of airflows in VAV (Variable
Air Volume) systems. The system saves costs and energy because the
flow and cooling effects are adapted to the actual demand in the
room, with the result that the total flow for the air treatment
units is reduced. RWP - Rectangular air volume flow regulator RWP
enables automatic air flow control.RWP is suitable for use in
systems with Variable Air Volume, VAV and Constant Air Volume, CAV.
Regulators can work in connection with other automatic control
devices e.g. quality-quantity temperature control systems. EMSS is a
flow variator in the OPTIVENT system. Cylindrical unisolated air
volume flow regulator EMSS enables automatic air flow control. MSS
is suitable for use in systems with Variable Air Volume, VAV and
Constant Air Volume, CAV. Regulator can work in connection with
other automatic control devices e.g. quality-quantity temperature
control systems. EMSD is a flow variator in the OPTIVENT system.
Cylindrical isolated air volume flow regulator EMSD enables
automatic air flow control. EMSD is suitable for use in systems with
Variable Air Volume, VAV and Constant Air Volume, CAV. Regulator can
work in connection with other automatic control devices e.g.
quality-quantity temperature control systems.
--
Gilberts
AirJet / FanJet : Conventional air conditioning systems have,
traditionally relied upon the basic principle of maintaining a
constant air volume with a variable temperature rate. While
satisfactory, in real terms, this type of system is not energy
efficient since the whole air volume is being conditioned throughout
the year. The variable air volume (VAV) principle however moves away
from this in that it supplies a variable fresh air flow rate at a
constant supply air temperature, varying the supply to offset the
heating or cooling requirements of the conditioned area. This type
of system is naturally more energy efficient since it conditions
only the required quantity of air at any one time. Further potential
advantages also include: Reduction of fan energy consumption at low
flow rates using a fan pressure sensing control system, Elimination
of wasteful re-heat through its ability to reduce the supply air
flow before re-heating, Room temperature sensors provide the
facility for automatic adjustment of individual room or zone
temperature, Flexibility in permitting recalibration of air flow
rates to suit any new zone requirements, The size and capacity of
air handling and associated equipment can be reduced, Sections of
multi-tenanted buildings may be commissioned whilst other areas are
still under completion.
--
Halton
Group's aim is to create a comfortable and safe indoor environment
with an energy-efficient and sustainable life cycle. Halton Indoors
offer indoor climate products and solutions for commercial and
public buildings. Halton Indoors have particular expertise in
solutions for office premises and hotel facilities, using their
expertise to meet individual customer requirements. They also
provide healthy, comfortable, productive and energy-efficient indoor
environments throughout their life cycle.
Arundel Jones Associates Ltd Registered in England and Wales No.
07334149 Hill Farm, Linton Hill, Maidstone, Kent ME 17 4AL Tel : 01622 745333
email
2008 copyright all rights reserved
Tender Category :
Fan Powered VAV, VAV Terminal Units, VAV Terminals
|