Request Quotation/Tender or Information Below

Featured companies for Smoke / Air Dampers

This page is associated with requesting prices, inviting tenders or requesting pre-tender information on the following;

Smoke Fire Volume Control Dampers, Smoke Air Dampers, Fire Dampers, Dampers, Heating, Ventilating, Air Conditioning, Air Distribution.

Gilberts have developed and manufacture specified smoke and fire dampers suitable for general as well as heavy duty industrial applications, including ventilation and HVAC ductwork. Gilberts has designed a smoke guard with the three modes to allow the ventilation of air during normal conditions, as well as for emergency conditions to prevent fire spreading. These preventative measures can be done manually, or through a control system. Gilberts industrial smoke and fire dampers which are comprised of motorised, galvanised mild steel blades can be activated via a Belimo square drive spring return motor. Electro thermal fuse allows external heat detection and automatic closure if the system were to fail. Gilberts work to ensure the highest standard of fan and ventilation systems in order to meet strict safety specifications.

Advanced Air provide practical air control and distribution systems, supplying smoke and fire dampers that are designed to prevent the spread of fire and smoke throughout the ventilation system. The 1200 Series is originally designed as a fire and smoke damper and can be used with air volume control applications. Models can be designed with an overriding mechanical fusible link or without, dependent on the requirements of the application. The 2300 Series designed as a hot smoke like extraction system and has a maximum operation temperature of 300°C for one hour. Advanced Air's quality in the design of the 2300 Series is demonstrated with its ability to maintain fire resistance about two hours providing it is fully closed. Other systems include the 2400 and 2500 Series, featuring insulated blades, providing protection against heat radiation, as will low leakage and four hour integrity.

Actionair designs and manufactures fire, damper products for offshore and marine applications, products are specifically engineered to meet strict design specifications due to the nature of operations. The A-60 fire damper is designed to be used with air conditioning and ventilation systems, with a maximum pressure of 1500 Pa, and duct velocities of 15m². Capable to be installed both vertically and horizontally, allowing for air flow applications in either direction, with fail safe systems incorporated into the design in case of power supply interruption. The A-60 fire is comprised of galvanised steel 1.2mm thick, 40mm flanged rectangular or circular casing, (316 stainless steel option available). 75mm interlocking 430 grade stainless steel aerodynamic blades, steel blade end bearings and 300 grade stainless steel peripherals.

Halton, Smoke Fire Volume Control Dampers, Smoke/Fire Dampers, Fire Dampers, Dampers, Heating, Ventilating, Air Conditioning, Air Distribution

Within the Halton ventilation fire safety system range include fire dampers, smoke and smoke evacuation dampers and fire valves. Quality is rigorously controlled by the Technical Research Centre of Finland (VTT) and all Halton fire dampers are tested prior to delivery. Smoke and fire dampers are all type-approved and compliant with the EN 1366-2 and EN 13501-3 standards.

Belimo Smoke Fire Volume Control Dampers, Smoke/Fire Dampers, Fire Dampers, Dampers, Heating, Ventilating, Air Conditioning, Air Distribution Belimo are world leaders in actuator and valve technology for the heating, ventilation and air conditioning industry, offering a full product range. Belimo actuators are supplied with open and close modulating 3 point control for AC/DV 24 volt and AC 110V/230V nominal voltages. Belimo maintain a consistent focus on market needs and trailblazing new developments, setting stanards in HVAC actuator and valve technology and reacting quickly and flexibly to individual requirements. All equipment is subjected to an individual and thorough inspection before delivery and Belimo offer a 5 year warranty on their entire product range.

Energy Design Solutions Smoke Fire Volume Control Dampers, Smoke/Fire Dampers, Fire Dampers, Dampers, Heating, Ventilating, Air Conditioning, Air Distribution Energy Design Solutions Ltd are technical sales consultants for the HVAC industry partnering with a number of leading UK manufacturers to provide bespoke engineered solutions to Building Services Consultants, Architects and Contractors. Their aim is to supply a seamless project from concept design feasibility to practical completion so that the project is delivered to the very highest quality, on budget and on time, every time. Not content to simply “sell boxes” they pride themselves on the ability to solve problems by actively selecting and specifying the latest products and to implement continuous design development with their core business partners. Their current product portfolio includes:
-Fully engineered range of external weather louvres and architectural louvre screens
-Solar shading (brise soleil)
-Grilles, diffusers, fire dampers, smoke dampers and volume control dampers
-Textile sock (fabric) ventilation
-Liquid and refrigerant gas leak detection systems

SEND YOUR TENDER OR REQUEST PRE TENDER INFORMATION

Your Name
*

Organisation

Phone
*

E-mail
*

Select which companies you wish to invite to tender or require pre-tender information from:

Gilberts
Advanced Air
ActionAir
Halton
Belimo
Energy Design Solutions Ltd
Attach tender information (optional)

Your requirements or instructions * required

Please select project type

Please enter numbers shown