Featured companies for Water Cooled Chillers
This page is associated with requesting prices, inviting tenders or requesting pre-tender information on the following;
Water Cooled Chillers, Chiller, Water Cooled, Water Cooled Packaged
Chillers, Screw Compressors, Single Flooded Evaporator
Daikin
develop and supply an extensive range of water-cooled chillers
requiring limited space in machine rooms. Water-cooled chillers are
suitable for the commercial and industrial sector, generating cold
and hot water, which can be used for chilling, heating and
simultaneous operation. Daikin's water-cooled chiller systems can be
categorised into three subdivisions, resulting in a combined
capacity 13 kW to 1893 kW. Daikin has recently introduced, high
efficiency flooded type, water-cooled chiller with stepless capacity
control. A high-efficiency motor is optimised with a sliding valve
position, determined by water temperature, to produce closely
matched capacity requirements. High part load efficiencies and
stable chilled water temperatures are achieved through better
control regulations. Daikin have also developed water-cooled
chillers without condensers, to reduce space requirements as well
as sound levels during operation.
--
Hitachi
water-cooled chillers range from 134kW - 696 kW operating power and
incorporates stepless compressor technology which allows for 15 to
20% energy saved over step control. Electric controlling systems enable
chillers to accurately maintain a constant outlet temperature,
independent of cooling loads. With these system developments Hitachi
is able to develop a water cooled chiller that provides highly
efficient cooling with minimal waste and cost-effective operations.
Hitachi also provide water-cooled chiller units without condensers,
available from 120kW to 360kW, and also uses stepless compressor
technology. The benefit of using twin screw compressors is the
highly reliable, continuous capacity control, allowing precise
independent cooling and increased efficiency and less refrigerant.
--
Fläkt
Woods offer a range of water-cooled chillers designed to provide a highly efficient cooling cost minimising
energy consumption costs. The water-cooled chillers have a cooling
capacity up to 1800 kW, providing a low energy consumption, as well
as low sound levels and low vibration levels during operations.
--
Dunham
Bush manufacture and supply and install a full range of packaged
water-cooled chillers with integrated scroll and screw compressor
technology and flooded evaporator designs. Water cooled packaged
chillers and have a high operation efficiency as well as low noise
volumes and optional direct expansion, multi-circuit shell in tube
evaporator systems. Improved full and partial load efficiency is a
result of a single flooded evaporator, continuous variable slide
valves and compressor switching is also key to excellent partial
load and efficiency.
--
The
Carrier 30RB chiller was launched in 2005 and was awarded two
industry Awards, being the first air cooled liquid chiller in its
capacity range designed to operate with R410A. It delivers
exceptional part-load energy efficiency and is the ideal response to
meet the rigorous demands of the new building regulations. Available
in both cooling only (240-760 kW) and heat pump versions (240-550
kW), other features include; excellent performance, integrated
hydronic modules (up to 500 kW), revolutionary free-cooling system,
scroll compressors and Flying Bird fans, and a heat recovery option.
--
Airedale
designs and manufactures a complete range of air conditioning
products for a global market and is part of the Modine group of
companies. Airedale has grown to become an
industry leader in the research, design and manufacture of an
extensive range of energy efficient, intelligent cooling solutions.
Airedale’s 25,000m² manufacturing facility and £2.5 million test
centre in Leeds, UK, is regarded as a centre of excellence for air
conditioning. Recent research and development has focused on carbon
reduction and increased energy efficiency technologies to ensure
that whole life costs and the environmental effects of all Airedale
products are reduced. Airedale’s range of air cooled, water cooled,
and remote condenser chillers provides customers with a huge choice
of cooling capacities from 20kW to 1MW to meet the needs of any
environment no matter how small or large.
--
The
Rhoss range of water cooled chillers, available exclusively through
Coolmation, offer high energy performance operation, Eurovent
validated, while meeting specific requirements. Rhoss water cooled
chillers are available in capacities up to 2100kW with scroll, screw
and the oil free Turbocor centrifugal compressors, and with R410A
and R134A refrigerants. Energy efficiency is enhanced by Rhoss’s
unique Adaptive Function Plus control technology and the majority of
the Rhoss air cooled chiller range are listed on the Carbon Trust
Energy Technology List.
--
As
the leading independent supplier of HVAC products,
2 Cool Ltd are able to provide complete packages based on the most
current design and supply needs within the industrial process and
HVAC markets.
--

Space Airconditioning is the largest independent
distributor of Daikin products, renown for their innovation, high
quality, energy efficiency and reliability. Space Air can offer
comprehensive design support, schematic drawings, product training
and reliable after-sales support. Their range of Daikin water
chillers (5kW to 1.9MW nom. capacity) includes 'stepless compressor'
chillers (107kW ~ 1.9MW) offering infinite capacity control from 15
- 100 %, 'mini-chillers' (5kW to 7kW) with built-in hydraulics, and
remote self-diagnostic controllers allowing the concurrent operation
of up to four chillers (2.2MW).
--
Uniflair
offer cooling products which are stylish, cost-conscious,
dependable, environmentally responsible, effective and efficient.
Moreover, engineering excellence embodies all of their designs.
Uniflair offer a vast array of options throughout their chiller
range including integral pump sets, heat recovery, built-in buffer
tanks, free cooling coils; each cooling system can be specifically
tailored to the customer's needs.
--
ICS
Industrial Cooling is a nationwide supplier of industrial cooling
units. As one of Europe’s leading specialists in cooling equipment
and services ICS has the expertise and experience you can trust. The
company provides a range of standard products and turnkey
installations across a diverse group of industry sectors. These
include plastics processing, metal finishing, food and beverage,
chemical, medical, engineering, automotive and aerospace to name but
a few. An extensive range of chillers are available to you
incorporating the latest energy efficient technology, such as
Turbocor Centrifugal compressors, ozone-benign refrigerants and free
cooling capabilities.Unsure of what you need and how it would apply
to your application? No problem. ICS have local engineers nationwide
who are experienced at engineering a solution and providing a
first-class assessment to assist with your decision-making.
Arundel Jones Associates LLP Registered in England and Wales No.
OC330189 Hill Farm, Linton Hill, Maidstone, Kent ME 17 4AL Tel : 01622 745333
email 2008 copyright all rights reserved
|